OneUp EDC Lite Tool

Never find yourself without a tool on a ride again! 

The OneUp Components EDC Lite is a compact version of the full EDC tool, featuring the 9 most common tools you'll need for quick repairs and adjustments on the trail. Designed to fit neatly inside your stem/steerer tube, the tool stays out of the way until you need it. Plus, you can install a carrier on each of your bikes, so you only need one multi-tool for all of them. 

The EDC Lite is compatible with any bike that has a star nut, as long as the steerer tube is the correct length. Installation is quick and simple, taking about 5 minutes or less, and does not require removing the star nut or threading the steerer tube. 

Specifications:

- Includes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx, and a Flat Head Screwdriver 

- Weight: 89g (only adds 75g to your bike) 

- Available in 6 colours: Black, Red, Blue, Green, Orange, Purple, Turquoise 

- Colour-matched to OneUp pedals, grips, chain guides, and handlebar decals 

Compatibility Notes

- Please ensure your fork is compatible—this is crucial! 

Steerer Tube Length Requirements:

- Fox (excluding Fox 38): 190mm minimum 

- Fox 38: 210mm minimum 

- RockShox: 210mm minimum

To check, measure from the underside of the fork crown to the top of your spacer stack, or to the top of your stem if you're not using any spacers above it.

Steerer Tube Inner Diameter:

- The inner diameter must be at least 24.1mm. Most tapered steerer tubes meet this requirement, but you can check by inserting the tip of the EDC Lite above the star nut before lowering the star nut position. 

Incompatible Forks:

- Giant Overdrive 2 (1-1/4”)

- Cannondale Lefty 

- Any bike with a carbon steerer